Multiva eCerex is a true all-around seeder. It is designed for seeding in minimum tillaged and ploughed soils. Thanks to its simple and service-free coulter the eCerex is an economical selection for farms that base their farming method on prepared seedbeds.
Advanced features from the eForte no-till seeders are incorporated into the eCerex seeder's coulter design, such as the covering wheel.
SeedPilot Isobus controller as standard
Readiness for precision agriculture as standard
Quick access to fertilizer
For plowed or minimum tillaged fields
Electric feeding - pioneering features
Multiva eCerex seeders rotate seeding axles with electric motors. The ISOBUS connection offers the power to the simple and reliable feeding system. The electric motors in the feeding react instantly to the changes of the driving speed and the seeding amount. The electric feeding allows very high seeding amounts with normal driving speeds. The precision agriculture properties of the e-seeders are wide with the help of the Multiva SeedPilot controller. The variable rate application of seed, fertilizer and small seed with the help of prescription map and gps is in the machines as standard. In addition, the automatic headland management and half-machine shut-off with the help of section control is among the eForte seeders properties.
Multiva Cerex seeding is well suited for varying conditions and flexibly after various cultivation methods. The sharp double disc coulters place the seed accurately and even large amounts of plant residue don’t affect the quality of the seeding.More details
Strong and exact Cerex coulter
Multiva Cerex seeders use a double disc coulter with high 120 kg maximum coulter pressure. The high coulter pressure for a seeder for cultivated soils ensures exact seeding even in minimum tillaged fields.More details
The double disc coulter cuts the soil efficiently and there is less coulters in the Multiva models than in many traditional seeders. In addition, the transport wheels have a large diameter resulting in a low rolling resistance. Due to these the power requirement and the fuel consumption are low with Multiva seeders.
Precise adjustments with the renewed feeder
In Multiva eForte and eCerex seeders, the seeding rate is controlled by adjusting the rotational speed of the seeding axles with help of individual electric motors for all hoppers. The generously dimensioned feeder allows great seeding rates to be used. The unique design of the two-cell feeder makes the usage of very small seeding rates eg. with oilseed rape extremely precise. The change from seeding bigger seeds to small seeds is very easy to do by closing flaps in the two-cell feeder thus leaving only the fine seed roller in use. The window in the feeder unit makes observation or cleaning easy.
Fast and easy calibration
In Multiva e-seeders, calibration is easier than ever before. A crank is not part of the process anymore, the calibration test is performed with the help of the electric motors. All the values are automatically available in the controller, remote control and variable rate application of seed and fertilizer are standard features. The stainless-steel calibration trays are in two pieces for easy handling. They are inserted into the tray holders separately for seed and fertilizer on the machine's left side. The trays are handy to store in the same tray holders for easy operation and protection.
Smallseed / start fertilizer equipment
In the new Multiva seeders, the small seed / start fertilizer hopper is completely redesigned. The equipment is integrated into the main hopper but thanks to the movable wall even the small seed hopper's volume can be utilized as part of the main hopper if not in use. The material seeded from the small seed hopper can be flexibly placed either into the seed row or behind the coulters on top of the soil. The small seed / start fertilizer feeder is equipped with two cell feeder units. A wide variety of different materials can be seeded with the equipment. A pendulum dispenser is available for special light grass seeds to ensure the continuous flow of material.
Precise speed control
In Multiva e-seeders, the speed data can be provided by either the sensor at the rear axle of the seeder, or by the tractor ISOBUS. The user has full control over the appropriate source of speed data, depending on the specific circumstances. Thanks to this, feeding rates are always adapting precisely and instantly to the changes in driving speed.
Easy to adjust coulter pressure
The coulter pressure is adjusted directly with the tractor hydraulics and the setting of the pressure can be seen form the SeedPilot controller’s terminal or with the Comfort controller from the mechanical scale in front of the machine. The coulter pressure is easy to adjust according to the soil type changes while seeding.
Great seeding capacity
Multiva Forte seeders have large hoppers and high road transport speeds can be used even with hoppers full. With Multiva seeder the work is easy and effortless and the operator can focus fully on controlling the machine. The middle wall of the hopper can be adjusted and the tarp is self-rolling.
Remote control of fertilizer or seed
With the electric feeder motors, the remote control of seed and fertilizer can be optimized for the soil type or conditions. The amount of seed or fertilizer can be changed easily from the controller. In the SEEDPILOT ISOBUS controller, the remote control can be adjusted automatically as variable rate application according to premade prescription maps with the help of GPS.
|Working width, cm||300||400|
|Transportation width, cm||300||409|
|Hopper filling height, cm||215||215|
|Hopper volume, l||3800||5300|
|Small seed hopper volume, l||370||510|
|Max. coulter pressure, kg||120||120|
|Number of coulters||20||26|
|Row spacing, mm||150||154|
|Work speed, km/h||8-12||8-12|
|Power requirement, hp||90||120|